(07) 5651 0891Get a free quote
Timber floor polishing Gold Coast

Timber Floor Polishing Gold Coast

  • Prompt Communication
  • High Quality Finish
  • Affordable Rates

Get A Free Quote

Floor Polishing and Coating Gold Coast

Sanding takes a floor back to clean timber, but the coating decides how it looks and how well it wears.

Timber floor polishing is the coating stage: two or three coats of polyurethane or oil laid over freshly sanded boards, with a light buff between coats so each one bonds to the last. The sheen you choose sets the feel of the room, from a high-gloss finish that bounces light around to a matte coat that keeps the timber looking close to bare.

With the right coating, the floor wipes clean, stands up to sand, pets and moving furniture, and keeps its colour for years before it needs another refresh.

Here's why homeowners choose us to coat their floors:

  • Prompt Communication: Questions about sheen, colour and drying times answered quickly, before and during the job.
  • High Quality Finish: Dust removed before every coat and each coat buffed, so the finish goes on smooth and even.
  • Affordable Rates: Competitive pricing on every coating option, with the product and number of coats set out on your quote.

If you want a finish that suits the room and holds up to everyday life, we'd be glad to help.

Call (07) 5651 0891 or use the form for a free quote.

Timber Floor Polishing Services Gold Coast

Mirror finish timber floor polishing Gold Coast

Mirror Finish Polishing

A high-gloss coat reflects light around the room and gives timber the deep, glassy look many people picture when they think of polished floors. Mirror finish timber floor polishing shows every bump and speck of dust, so it suits floors that have been sanded flat and kept clean between coats.

Satin timber floor finish in Gold Coast

Satin and Matte Finishes

Lower-sheen coats keep the natural look of the timber and do a better job of hiding fine scratches, dust and paw prints. Satin sits halfway between gloss and matte, while a matte coat looks closest to bare timber and still seals the boards.

Water-based floor coating Gold Coast

Water-Based Polyurethane

Water-based coatings dry quickly, have a lower odour and stay clear, so pale species like blackbutt keep their colour instead of yellowing. They suit households that need to be back in the house sooner.

Solvent-based polyurethane floor in Gold Coast

Solvent-Based Polyurethane

Solvent-based polyurethane builds a harder, thicker film and adds a warm amber tone that deepens red and brown timbers. It takes longer to dry and has a strong smell while it cures, so the house usually needs to be empty for a few days.

Natural oil timber floor finish Gold Coast

Natural Oil Finishes

Penetrating oils soak into the timber rather than sitting on top, giving a soft, natural feel underfoot, and they're the usual finish outdoors after timber deck sanding. Worn areas can be touched up without recoating the whole floor, though oil needs more regular upkeep than polyurethane.

Stained timber floor polishing in Gold Coast

Stains and Limewash

A stain or limewash changes the colour of the timber before it's sealed, from deeper tones on a pale floor to the limewashed beach house look that suits coastal homes. The colour goes on after sanding and before the clear coats, so it's sealed in and protected.

Worn timber floor coating Gold Coast

Get the Coating Wrong and You’ll Be Sanding the Floor Again

The coating is the only thing standing between the timber and daily wear. Laid over leftover dust, put on too thin or chosen without thinking about how the room is used, it wears through in hallways and kitchens first. A worn patch can't be blended back in, so the whole floor goes back to bare timber.

Timber floor polishers in Gold Coast

Why Choose Us?

Experienced Timber Floor Polishers Gold Coast

Getting a coating to last comes down to what happens before the first coat goes on. The timber has to be sanded evenly, every trace of dust removed, and the product chosen for how the room is actually used, whether that's a busy kitchen, a hallway full of sandy feet or a bedroom that barely sees traffic.

That's where we focus. We look at the timber and how each room is used before recommending a finish, then build it up coat by coat until the floor is sealed from wall to wall. The result looks right on day one and keeps protecting the timber for years.

Here's what you can count on when we coat your floors:

  • Prompt Communication

    We talk you through sheen, colour and drying times before work starts, and let you know when each coat is down and when you can walk on it.

  • High Quality Finish

    Every coat goes on over a vacuumed, dust-free floor and is buffed before the next, which gives a smooth, even sheen without bubbles or roller marks.

  • Affordable Rates

    Your quote names the product and the number of coats, so you can compare finishes on price as well as looks.

If you want a finish chosen for the way you live, our floor sanding company is ready to help. Call (07) 5651 0891 for a free quote.

4 Benefits of Polished Timber Floors

  • Protected Timber

    A sealed surface stops spills, sand and grit from working into the boards, so the timber underneath stays sound and the floor goes longer between sandings.

  • Easier Cleaning

    A smooth coat wipes clean with a damp mop, and dust and pet hair have nowhere to settle in the grain. Everyday cleaning becomes a lot more simple.

  • The Look You Want

    Gloss, satin or matte, clear or stained, the finish lets you match the floor to the rest of the house, from a modern renovation to a classic Queenslander.

  • Brighter Rooms

    A fresh coat brings back the depth of the grain and reflects more light, so rooms feel brighter and newly finished.

4 Steps to a Freshly Polished Timber Floor

Floor polishing Gold Coast
  1. 1

    Free Quote

    Call or send the form with a few details about your floor, and we'll arrange a time to look at it. We check the timber, the existing coating and how the rooms are used, then recommend a finish and quote for it.

  2. 2

    Sanding and Preparation

    Any timber floor repairs are done first, then the old coating is sanded off and the boards are taken back to clean timber. The floor is vacuumed so no dust is trapped under the first coat.

  3. 3

    Coating

    Two or three coats of your chosen finish go on, with a light buff and clean between each one so they bond. Drying time between coats depends on the product and the weather.

  4. 4

    Enjoy Your Polished Floor

    Once the final coat is dry, we pack up and let you know when it's safe to walk on the floor and move furniture back. We also explain how long the coating takes to fully cure and how to clean it in the meantime.

Gold Coast Timber Floor Polishing FAQs

Which floor finish is best for a home with kids or pets?

A hard-wearing polyurethane in a satin or matte sheen is usually the best fit. Lower sheens hide the fine scratches and paw prints that show up on a high-gloss floor, and a polyurethane film resists spills and scuffs better than an oil.

Gloss still works in busy homes, but every mark catches the light, so it suits people who don't mind regular cleaning. A rug at the back door and felt pads under chairs make a big difference whichever finish you choose.

If you'd like to see the sheens side by side before deciding, call us on (07) 5651 0891 and we'll bring samples when we quote.

Can engineered or veneer floors be polished?

Often, yes. Engineered boards have a layer of real timber on top, and if that layer is thick enough, the floor can be lightly sanded and recoated like solid timber. Thin veneers may only take a buff and recoat, because sanding would cut through to the board underneath.

The thickness of the top layer is the main difference between sanding solid and engineered boards, and it can usually be checked at a board edge, a floor vent or a doorway.

If you're not sure what's under your feet, get in touch and we'll check before recommending anything.

How long before I can walk on a newly polished floor?

With water-based coatings, light foot traffic in socks is usually fine within a day of the final coat, and solvent-based coatings need a little longer. Furniture and rugs should wait until the coating has cured, which can take a week or more depending on the product and the weather.

Rugs are the last thing to go back, because they trap air against a coating that's still hardening and can leave marks, an easy mistake to make when caring for newly polished timber floors. We'll give you dates to work to for your floor.

Can you recoat my floor without sanding it back?

Sometimes. If the existing coating is intact and just looks dull or lightly scratched, a buff and recoat can freshen it up without taking the floor back to bare timber. It costs less and takes less time than a full sand.

A recoat won't fix deep scratches, worn-through patches, grey or water-stained timber, or a change of colour, and the new coat has to be compatible with the old one. The difference between buffing, screening and full sanding comes down to how much of the old finish needs to come off.

To find out which your floor needs, call us on (07) 5651 0891 and we'll take a look.

Will a clear coat change the colour of my timber?

It depends on the coating. Solvent-based polyurethane adds a warm amber tone that deepens over time, while most water-based coatings stay clear and keep pale timber looking pale. Oils darken the timber slightly, much like wiping it with a damp cloth.

Every species reacts a little differently, so the same coating can look quite different on blackbutt and spotted gum. A test patch on your own floor is the most reliable way to see the result before the whole floor is done.

If colour matters to you, call us on (07) 5651 0891 and we'll arrange a sample on your floor before you choose.

Areas we service

We service the Gold Coast and Scenic Rim including these townships. Not sure if we cover you? Give us a call.

  • Ashmore
  • Biggera Waters
  • Broadbeach
  • Burleigh Heads
  • Carrara
  • Coomera
  • Currumbin
  • Elanora
  • Helensvale
  • Hope Island
  • Labrador
  • Mermaid Waters
  • Miami
  • Molendinar
  • Nerang
  • Pacific Pines
  • Palm Beach
  • Paradise Point
  • Parkwood
  • Reedy Creek
  • Robina
  • Runaway Bay
  • Southport
  • Surfers Paradise
  • Tallebudgera
  • Tugun
  • Worongary
  • Beaudesert
  • Boonah
  • Tamborine
  • Jimboomba
  • Scenic Rim
  • Advancetown
  • Alberton
  • Anglers Paradise
  • Arundel
  • Austinville
  • Bahrs Scrub
  • Bannockburn
  • Beechmont
  • Beenleigh
  • Belivah
  • Benobble
  • Benowa
  • Benowa Waters
  • Bethania
  • Bilinga
  • Bonogin
  • Boyland
  • Broadbeach Waters
  • Bundall
  • Burleigh Waters
  • Canungra
  • Chevron Island
  • Clagiraba
  • Clear Island Waters
  • Coolangatta
  • Coombabah
  • Coomera Waters
  • Cronin Island
  • Currumbin Valley
  • Currumbin Waters
  • Eagle Heights
  • Eagleby
  • Edens Landing
  • Ephraim Island
  • Ferny Glen
  • Florida Gardens
  • Flying Fox
  • Gaven
  • Gilberton
  • Gilston
  • Guanaba
  • Highland Park
  • Hollywell
  • Holmview
  • Illinbah
  • Isle of Capri
  • Jacobs Well
  • Kingsholme
  • Kirra
  • Lamington National Park
  • Lower Beechmont
  • Luscombe
  • Main Beach
  • Maudsland
  • Mermaid Beach
  • Merrimac
  • Monterey Keys
  • Mount Nathan
  • Mount Warren Park
  • Mudgeeraba
  • Natural Bridge
  • Neranwood
  • Nobby Beach
  • Norwell
  • Numinbah Valley
  • Ormeau
  • Ormeau Hills
  • Oxenford
  • Paradise Island
  • Paradise Waters
  • Pimpama
  • Sanctuary Cove
  • Santa Barbara
  • Sarabah
  • South Stradbroke
  • Southern Moreton Bay Islands
  • Southport Park
  • Sovereign Islands
  • Springbrook
  • Stapylton
  • Steiglitz
  • Studio Village
  • Tallai
  • Tallebudgera Valley
  • Tamborine Mountain
  • Upper Coomera
  • Varsity Lakes
  • Waterford
  • Willow Vale
  • Windaroo
  • Witheren
  • Wolffdene
  • Wongawallan
  • Wonglepong
  • Woongoolba
  • Yatala
  • Biddaddaba
  • Birnam
  • Bromelton
  • Christmas Creek
  • Cryna
  • Gleneagle
  • Hillview
  • Innisplain
  • Josephville
  • Kerry
  • Kooralbyn
  • Lamington
  • Laravale
  • Palen Creek
  • Rathdowney
  • Tabooba
  • Tabragalba
  • Tamrookum
  • Tamrookum Creek
  • Aratula
  • Charlwood
  • Coulson
  • Fassifern
  • Harrisville
  • Kalbar
  • Maroon
  • Moogerah
  • Mount Alford
  • Mount Walker
  • Roadvale
  • Rosevale
  • Silverdale
  • Tarome
  • Templin
  • Warrill View
  • Allandale
  • Allenview
  • Anthony
  • Barney View
  • Binna Burra
  • Blantyre
  • Bunburra
  • Bunjurgen
  • Burnett Creek
  • Cainbable
  • Cannon Creek
  • Carneys Creek
  • Chinghee Creek
  • Clumber
  • Coleyville
  • Coochin
  • Croftby
  • Darlington
  • Dugandan
  • Fassifern Valley
  • Frazerview
  • Frenches Creek
  • Hoya
  • Kagaru
  • Kents Lagoon
  • Kents Pocket
  • Knapp Creek
  • Kulgun
  • Limestone Ridges
  • Lower Mount Walker
  • Merryvale
  • Milbong
  • Milford
  • Milora
  • Moorang
  • Morwincha
  • Mount Barney
  • Mount Edwards
  • Mount Forbes
  • Mount French
  • Mount Gipps
  • Mount Lindesay
  • Mount Walker West
  • Munbilla
  • Mutdapilly
  • Nindooinbah
  • North Tamborine
  • Oaky Creek
  • Obum Obum
  • O’Reilly
  • Peak Crossing
  • Radford
  • Running Creek
  • Southern Lamington
  • Teviotville
  • Undullah
  • Veresdale
  • Veresdale Scrub
  • Wallaces Creek
  • Washpool
  • Wilsons Plains
  • Woolooman
  • Wyaralong
Free timber floor polishing quotes in Gold Coast

Contact Us

Get A Free Quote

(07) 5651 0891

Servicing the Gold Coast & Scenic Rim

Call For a Free Quote (07) 5651 0891